Slimjet 31 and 32.0.1.0 - 32bit Does not Launch on Linux

Slimjet bug reports
Post Reply
Average Joe
Posts: 4
Joined: Wed Jul 14, 2021 4:27 am

Slimjet 31 and 32.0.1.0 - 32bit Does not Launch on Linux

Post by Average Joe »

Hi everyone.

I've been using and recommending Slimjet to everyone since a long time. (Meanwhile I know 32bit will be dropped soon.)

I'm an MX Linux user. Slimjet is installed (always with no issues) via "MX Package Installer" tool. (Currently MX 19.4 , based on Debian 10 - Buster )

I know, you'll say to write in MX forum. But the packages are coming directly from Flashpeak-Slimjet sources and also the installation finished successfully (re-installed 2 times).

Last time it was ok with 30.0.x.x

(Currently I'm writing on Windows 30.0.4 )

I guess there may be just a tiny thing preventing Slimjet to start (I also tried from Terminal). This is also a kind of feedback ...

Code: Select all

$ apt-cache policy slimj*
slimjet:
  Installed: 31.0.1.0
  Candidate: 31.0.1.0
  Version table:
 *** 31.0.1.0 100
        100 /var/lib/dpkg/status

Code: Select all

$ apt list *slimj*
Listing... Done
slimjet/now 31.0.1.0 i386 [installed,local]
Thank you all in advance.
Last edited by Average Joe on Sat Sep 25, 2021 12:28 pm, edited 2 times in total.

Average Joe
Posts: 4
Joined: Wed Jul 14, 2021 4:27 am

Re: Slimjet 31.0.1.0 - 32bit Does not Start on Linux

Post by Average Joe »

P.S. I already tried these:
  • Renamed slimjet folder in ~/.config
  • Created a new user and tried to start it there
  • Left only en-GB.pak and en-US.pak in /opt/slimjet/locales/
... nothing changed.

... If I try to manually run the sh in a terminal:

Code: Select all

$ sh /usr/bin/flashpeak-slimjet
/usr/bin/xdg-settings
/usr/bin/flashpeak-slimjet: 147: /usr/bin/flashpeak-slimjet: [[: not found
/usr/bin/flashpeak-slimjet: 162: /usr/bin/flashpeak-slimjet: Syntax error: "(" unexpected (expecting "fi")

fisher0815
Posts: 1
Joined: Fri Jul 16, 2021 10:04 am

Re: Slimjet 31.0.1.0 - 32bit Does not Start on Linux

Post by fisher0815 »

I'm using Debian Buster 32-Bit und Slimjet 32-Bit works till version 30.0.5.0.
Version 31.0.1.0 and 31.0.0.0 doesn't work any more. It starts, but I've got an error page and I can't call any web address.

uname -a
Linux acer 4.19.0-17-686-pae #1 SMP Debian 4.19.194-2 (2021-06-21) i686 GNU/Linux

The startup output of the not working version 31.0.1.0:

Code: Select all

m@acer:~$ flashpeak-slimjet 
execv failed: No such file or directory
[1:1:0716/175806.457869:ERROR:nacl_fork_delegate_linux.cc(329)] Bad NaCl helper startup ack (0 bytes)
[6057:6057:0716/175806.701339:ERROR:gl_implementation.cc(285)] Failed to load /opt/slimjet/libGLESv2.so: /opt/slimjet/libGLESv2.so: Kann die Shared-Object-Datei nicht öffnen: Datei oder Verzeichnis nicht gefunden
[6057:6057:0716/175806.732783:ERROR:viz_main_impl.cc(150)] Exiting GPU process due to errors during initialization
[6086:6086:0716/175806.893013:ERROR:gpu_init.cc(426)] Passthrough is not supported, GL is egl
[5883:6015:0716/175807.033034:ERROR:nacl_browser.cc(290)] Failed to open NaCl IRT file "/opt/slimjet/nacl_irt_x86_32.nexe": -4
[6108:6108:0716/175807.130096:ERROR:gpu_init.cc(426)] Passthrough is not supported, GL is egl
[6135:6135:0716/175807.294678:ERROR:gpu_init.cc(426)] Passthrough is not supported, GL is egl
[6153:6153:0716/175807.390559:ERROR:gpu_init.cc(426)] Passthrough is not supported, GL is disabled
[6178:6178:0716/175807.544712:ERROR:gpu_init.cc(426)] Passthrough is not supported, GL is disabled
[6178:6178:0716/175807.548024:ERROR:sandbox_linux.cc(374)] InitializeSandbox() called with multiple threads in process gpu-process.
The startup output of the working version 30.0.5.0.:

Code: Select all

m@acer:~$ flashpeak-slimjet 
execv failed: No such file or directory
[1:1:0716/180223.909463:ERROR:nacl_fork_delegate_linux.cc(329)] Bad NaCl helper startup ack (0 bytes)
[28274:28274:0716/180224.209548:ERROR:gl_implementation.cc(282)] Failed to load /opt/slimjet/libGLESv2.so: /opt/slimjet/libGLESv2.so: Kann die Shared-Object-Datei nicht öffnen: Datei oder Verzeichnis nicht gefunden
[28274:28274:0716/180224.272254:ERROR:viz_main_impl.cc(150)] Exiting GPU process due to errors during initialization
[28105:28264:0716/180224.402745:ERROR:login_database.cc(641)] Password store database is too new, kCurrentVersionNumber=28, GetCompatibleVersionNumber=29
[28105:28264:0716/180224.402974:ERROR:password_store_default.cc(39)] Could not create/open login database.
[28105:28264:0716/180224.407814:ERROR:login_database.cc(641)] Password store database is too new, kCurrentVersionNumber=28, GetCompatibleVersionNumber=29
[28105:28264:0716/180224.415721:ERROR:password_store_default.cc(39)] Could not create/open login database.
[28105:28220:0716/180224.457392:ERROR:nacl_browser.cc(290)] Failed to open NaCl IRT file "/opt/slimjet/nacl_irt_x86_32.nexe": -4

Average Joe
Posts: 4
Joined: Wed Jul 14, 2021 4:27 am

Re: Slimjet 31.0.1.0 - 32bit Does not Start on Linux

Post by Average Joe »

Today installed 32.0.0

Still the same. Not launching :(

Average Joe
Posts: 4
Joined: Wed Jul 14, 2021 4:27 am

Re: Slimjet 31 and 32.0.0 - 32bit Does not Launch on Linux

Post by Average Joe »

Sorry but 32.0.1.0 is no different, though it says in "What's new" : "Fix starting issue with linux version." .

Everytime I remove them and turn back to 30.0.5

Just looking at the conky: When you click to launch, the Cpu and Ram moves up for a moment as if it'll start, but that's all, nothing more ..

Post Reply